- Selection Required: Select product options above before making new offer.
- Error: There was an error sending your offer, please try again. If this problem persists, please contact us.
2 Banda Viking 5001 Digital Amplifier Module 1 Ohms 5000 Watts Rms 1 channel
$714,90
- Description
- Reviews (0)
Description
2 Banda Viking 5001 Digital Amplifier Module 1 Ohms 5000 Watts Rms 1 channel
DESCRIPTION
Banda Viking 5001 Mono 1 Channel 5000W RMS 1 Ohm Amplifier Module
To get a barbaric sound , the Banda goes from Viking 5000 . This amplifier module achieves 5000W RMS with nominal impedance at 1 Ohm . Through the mono input of wire , you mount a complete system with the high quality of their performance .Ideal to protect the system with distortion and short indication , the sound module is manufactured with a high-strength metal housing . In addition to dissipating less heat as it is a Class D module , the Viking 5000It has micro fans for temperature control .
Features gain control and active crossover for low pass adjustment from 30 to 8000Hz . So it can boost the frequencies of your sound project with superior quality.
Available model:
• 1 Ohm
Specification:
• Model Viking 5001
• Power 5000W RMS
• 1 Channel Mono
• Power 5000WRMS @ 1Ohm/12.6VDC
• Power 6700WRMS @ 1Ohm/14.4VDC
• Power 3600WRMS @ 2Ohms/12.6VDC
• Power 4300WRMS @ 2Ohms / 14.4VDC
• Approximate full power consumption @ 12.6VDC: 400A (music signal)
• Operating class D
• Active Crossover Linkwitz-Riley Low-Pass variable 30Hz to 8000Hz (12dB/octave)
• Frequency Response from 30Hz to 8000Hz
• Variable Subsonic Filter from 30Hz to 120Hz
• Total Harmonic Distortion (THD) less than 0.3%
• Signal to Noise Ratio (S/N) better than 82.4dB
• Damping Factor > 100
• Input Sensitivity from 0.2 to 4Vrms
• Signal Input Impedance 47kOhms • Signal
Input in Differential Mode
• Dedicated Control System: Evaluates the working conditions checking for short circuit in the output
• Blue LED indicator of Source and amplifiers On/On
• Red LED indicator for Distortion at output (Clipping) or short circuit at output
• Yellow LED indicator for Out of fuse/Battery voltage below specified.
• Approximate Dimensions (LxHxW): 443x64x257mmAttention: In accordance with Federal Law No. 11.291, prolonged exposure to noise greater than 85 dB can damage the hearing system.
• Model Viking 5001
• Power 5000W RMS
• 1 Channel Mono
• Power 5000WRMS @ 1Ohm/12.6VDC
• Power 6700WRMS @ 1Ohm/14.4VDC
• Power 3600WRMS @ 2Ohms/12.6VDC
• Power 4300WRMS @ 2Ohms / 14.4VDC
• Approximate full power consumption @ 12.6VDC: 400A (music signal)
• Operating class D
• Active Crossover Linkwitz-Riley Low-Pass variable 30Hz to 8000Hz (12dB/octave)
• Frequency Response from 30Hz to 8000Hz
• Variable Subsonic Filter from 30Hz to 120Hz
• Total Harmonic Distortion (THD) less than 0.3%
• Signal to Noise Ratio (S/N) better than 82.4dB
• Damping Factor > 100
• Input Sensitivity from 0.2 to 4Vrms
• Signal Input Impedance 47kOhms • Signal
Input in Differential Mode
• Dedicated Control System: Evaluates the working conditions checking for short circuit in the output
• Blue LED indicator of Source and amplifiers On/On
• Red LED indicator for Distortion at output (Clipping) or short circuit at output
• Yellow LED indicator for Out of fuse/Battery voltage below specified.
• Approximate Dimensions (LxHxW): 443x64x257mmAttention: In accordance with Federal Law No. 11.291, prolonged exposure to noise greater than 85 dB can damage the hearing system.
Package Contents:
• 1 Banda Viking 5001 Module
Please feel free to ask any question about the item !
Hablamos Español también ! Estea libre para hacer preguntas acerca del producto !!
Thank you !
Gracias !
Reviews
There are no reviews yet.